How to Connect CCTV Camera to Laptop with Internet

It can be very frustrating when you have a CCTV camera, and you want to view it on the PC but don’t know how to connect CCTV camera to laptop with internet. Not to worry, there are different ways by which you can do this.

The most obvious way would be connecting the camera to a laptop or computer directly by using a USB cable that typically comes with cameras.

The problem with this method is that not all computers have a compatible port for your camera’s USB interface; some newer laptops even lack ports completely.

If you’re lucky enough, then good for you because otherwise, move on to another method.

How to set up a CCTV camera system

It’s a widespread problem that many people in the world face behavioral issues, especially in the workplace.

So this article will show you how to set up the best outdoor security camera system for yourself and program it with your laptop so you can watch it from anywhere around the world.

First of all, you need to understand what IP means. IP is an acronym for Internet Protocol.

It’s a standard way for computers to communicate over the internet when routed through routers.

You need to find a nearby CCTV IP address. This can easily be found by looking at your router’s settings page.

I’m going to show you how to make your video camera appear on your computer as if it was plugged into a router even though it’s not, using only a network cable and some software.

Ensure your PC and CCTV have their power supply because the camera will need to be always on for this to work.

If you don’t plug your laptop or pc into its power supply, it won’t run the software.

Next, you need to install an application called RDP (Remote Desktop Protocol) onto your PC. It is the software that allows us to access your computer remotely over the internet.

Advantages of connecting CCTV camera to laptop with internet

Step 1:

Go to your nearest electronics store and purchase a USB WIFI adapter. They were not expensive, and they cost around $20-$30.

Step 2:

Once you have purchased the USB WIFI adapter, return home and plug it into the PC/Laptop, it must be connected wirelessly.

Suppose you don’t buy one with an integral antenna. In that case, you can remove the integral antenna from another device (e.g., router)and attach it to the USB wireless card by unscrewing it and screwing on the other antenna.

Most of them come with an external loop-shaped antenna that screws onto the top of the device where there is usually a tiny hole for them to fit into.

Step 3:

Then plug in the USB WIFI adapter to your laptop or PC, connect the Ethernet cable to your modem, and the other end to the wireless card’s Ethernet port.

If you’re not an expert, follow this simple guide step by step, and you will soon be up and running.

How to connect CCTV camera to laptop with internet?

There are different CCTV Camera types and specifications available. Some have wires, while others are wireless, making them easier to install and put in use.

The connection process also depends on the type of your camera. If it is a wired one, you have to run cables from the camera to the router.

The other way is to set up the camera wirelessly. You can connect your wireless camera through an ethernet cable, or you can use a USB adapter if it’s not intended for wireless connection.

Before installing your cameras, you need to choose where to place them. It depends on what you want to monitor and how much recording space you allocate to each camera.

Once they are in their proper places, connect them via cables and find a proper spot for the recorder where it will remain plugged in all the time.

After setting up your cameras successfully, install security software on your computer. Many manufacturers provide free software to use with their products.

You can also get a free trial of a recommended software from the internet. The best thing about having surveillance software is that you will monitor everything your camera records on your computer or laptop.

You can also use them for recording purposes and get important information if someone tries to break into your home or office.

Now that you have set up your cameras, it’s time to connect them to the recorder and then the router.

Check the network settings if they are set up to perform these tasks automatically by themselves. If not, go back and change their network setting using a supplied CD/DVD, which came with the product package.

Now, plug in your cables from both ends to establish a secure connection.

The next step is to find the IP address of your camera and add it to the settings of your recording software so it can monitor both incoming and outgoing traffic.

Ensure you enable port forwarding IP camera if your cameras need to be connected externally through the internet.

Now you can enjoy 24/7 monitoring from your PC or laptop any time you want by simply connecting to its IP address which appears in the network setting.

Most suppliers provide free live video links that enable users locally and watch their products online via computer or mobile phone.

Wireless CCTV cameras

The wireless CCTV camera is easier to install since you don’t need to run cables around your home or office premises.

Get a USB adapter for each camera and plug it in the recorder, connect it with the router, and set up the IP address through the security software on your PC, just like wired ones are connected.

They are also more expensive than wired units, but they are still convenient to use.

Remotely monitoring your surveillance system from another place is practically possible if you have an internet connection available both on your computer/laptop and at least one of your cameras which have port forwarding enabled.

With this capability, users can access their live video feeds remotely through devices with internet connectivity.

If you will be away from home and need to monitor your surveillance system, make sure to use a laptop and not a smartphone since the latter has limited access.

Most network cameras have a built-in NAI (Network Associates Inc.) security protocol which provides high-quality images with less bandwidth consumption.

To properly communicate with one another, use LAN or WAN protocols for them.

Suppose you don’t know how these work; ask a technician to help you set up port forwarding. It can be unpleasant if it’s your first time, so have someone experienced to do it for you.

Setting up a CCTV camera on your computer or laptop is not difficult once you understand the types of cables, connection protocol, and camera network settings.

Easy steps to connect CCTV camera to laptop with internet

Ever wanted to check out what’s going on at home or wherever you have a CCTV camera? You can do this; all you need is an android phone, a laptop with an internet connection, and a CCTV Camera.  Here are the steps:

If this doesn’t work, try turning off the firewall completely (for testing purposes!): https://www.wikihow.com/Disable-Windows-7-Firewall

You can also install TeamViewer or any other remote control software if you want to access your webcam feed securely over the internet instead of having an open internet address.

Related Topics