A common question that arises during the installation of CCTV cameras is how to adjust CCTV camera angle by finding the right angle.
You may need to monitor several different points on your property, and you have to select one Camera for each area.
The most obvious area to monitor will usually be the main entrance. This way, you can see who’s entering your house or business, who’s stealing packages from your porch, etc.
But there are also points around the rest of your property that should not go unnoticed. So, let’s jump into the article.
Importance of how to adjust CCTV camera angle
First of all, there are different CCTV Camera types and specifications around us, and we need to know that angles play an essential part in securing areas properly; thus, we cannot put these devices at random.
Most of the time, CCTV camera setup becomes useless if they do not record anything because it does not provide additional information apart from what was present there earlier;
It only captures images of moving objects along with time and date stamps. An ideal CCTV camera system for commercial areas should have a wide view angle.
It is vital to install multiple cameras in a particular area rather than installing one Camera at a time;
It will help you to capture clear video recordings of all movements.
If people with bad intentions can see what’s happening around them, they will soon start planning their moves carefully, making it harder for us to stop them before they do something wrong.
How to position CCTV cameras
Because they record all events and determine how actions proceed (when monitoring your staff), for a vast was a case when all rooms in one company were made available to employees during their breaks.
There were no surveillance cameras, but three burglaries occurred in the period recorded by other types of equipment are no strict rules for placing the device since the system’s task depends on many factors:
How to adjust CCTV camera zoom and focus
To adjust CCTV camera zoom and focus, please follow the instructions below:
The Video Camera will automatically set to Auto Focus at first use (except for Flash Mode, which needs to be adjusted manually); therefore, it has been configured for Auto Focus by default.
You can see a green square when the subject is in focus, a red square otherwise. The target object will be in the direction when it is under the white bar.
You can see that the upper picture is zoomed out while the lower image is zoomed in.
Zooming too close may show grainy images which you cannot even recognize if there are any people.
So please do not play around with the zoom button to get a closer look at something. For most cases, Auto Focus is sufficient for most purposes.
Please do not try to adjust focus when video recording or using flash mode because it may interrupt the normal working of the Camera.
If this happens, turn the Camera off and back on again until the LED turns green again.
When adjusting zoom, you can stay on the screen for 5 seconds with no camera action to reset Auto Focus, but if you are using the flash mode, there is no way to reset it.
If focus cannot be adjusted automatically or manually due to lack of light, please follow the instructions below:
So, estimating the correct object distance before attempting manual adjustment – turning on the zoom function whenever necessary (mostly) and cropping out the image’s upper or lower part.
The Video Camera will automatically Auto Focus at first use (except for Flash Mode, which needs to be adjusted manually); therefore, it has been configured for Auto Focus by default.
Zooming too close may show grainy images that you cannot even recognize if there are any people, so please do not play around with the zoom button.
For most cases, Auto Focus is sufficient for most purposes. Note: Please do not try to adjust focus when video recording or using flash mode because it may interrupt the normal working of the Camera.
If this happens, turn the Camera off and back on again until the LED turns green again. When adjusting zoom, you can stay on the screen for 5 seconds with no camera action to reset Auto Focus, but there is no way to reset it if you use flash mode.
How to adjust Hikvision turret camera
It is an excellent environment system that can adjust the pan, tilt angle, and viewing area.
When trying to view a particular object, no matter how much it moves around, the turret camera will always focus on it.
The camera control software provides higher performance than manual operation, and it’s effortless to adjust and use.
Prepare two pieces of 5-8m long aluminum pipes with a diameter less than 22mm. The first pipe should be connected to the camera head pivot, while the other should directly relate to the turret motor platform.
Both ends should have flanges or metal sleeves attached that can be tightened with screws.
If you’re not familiar with this kind of metal hardware, you can contact the seller to buy all these pipes and fix them together.
After setting up process finishes, you will see a green rectangle shown on the software interface whose size perfectly fits your field of vision range.
And move the cursor point around this rectangle with the mouse or keyboard arrow keys to adjust the panning direction of each head.
Now you can connect cables to each head and start using your turret camera. I recommend you switch off all unnecessary utilities except power on the button or router so that the surrounding electromagnetic waves won’t affect it.
If you are furious about your new piece of equipment, install a good quality lockbox to avoid unwanted thieves!
I hope the above will help some people who are seeking guidance on adjusting Hikvision cameras properly.
How to adjust dome CCTV camera
Adjusting dome cameras is necessary for gaining the best view of your surroundings. These adjustments consist of panning (pan), tilting (tilt,) and zoom, all moving to focus on different points in any given area.
You can be done panning using either a joystick or keypad. The joystick is located directly below the visual screen on most models, while non-visual versions have a button that performs its function.
Press this joystick or button until you get to where you want on screen; then press it again and hold it there until the cursor changes from an arrow into an hourglass, saving your adjustment.
You know the change has occurred when there’s no more movement after touching the joystick.
Tilting requires the operator to access a switch locator, usually in a joystick or button next to the panning cursor.
While panning is used for horizontal movement (left and right), tilting deals with vertical motion (up and down).
Zooming can be using a digital zoom when your Camera has that functionality. Digital zoom far exceeds optical zoom and allows you to see much more transparent images up close.
Turn on digital zoom and activate it by pressing a button found within the menu panel until you reach an icon representing this function.
Once it’s activated, use one of the previously mentioned controls to move further away from or closer to what you’re viewing via your Camera.
It’s essential for security cameras to be appropriately adjusted so that they’re focused on the outside of the dome, rotating it in one direction and then pressing it again and holding it for a brief moment until you see an hourglass.
If there’s no change, adjust further and hold again.